Step 9 - Fit the right side panel top assembly
Parts:
1 x Right side panel top assembly
3 x M5 * 8mm button head bolt
3 x M5 square nut
1 x M5 * 10mm button head bolt
Insert the 8mm bolts into the
assembly in positions marked 1,2,3,
and add the square nuts on the
inside, loosely.
Slide the assembly down over the
side panel, inserting the square
nuts into the outer channels on the
uprights.
Screw the 10mm bolt into the square nut which is already in the outside channel of the assembly
and tighten by hand. This will form part of the storm lock (see end of guide)
The front end goes down as far as it will go, and the rear end is flush with the top of the rear
upright (see drawing below). Tighten the bolts.
Step 10 - Fit the
le
side panel top assembly
Parts:
1 x Right side panel top assembly
3 x M5 * 8mm button head bolt
3 x M5 square nut
Repeat for the le hand side
(apart from the storm lock bolt which is only on the right
side)
