!
2C Operation Safety
_
•
Keep hands, feet, hair, clothing, and jewelry away from all moving and/or rotating
parts.
•
Inspect the machine before operating. Ensure condition of belts, gearboxes,
drivelines, etc. are sufficient for operation and repair or replace if necessary.
•
Stay away from overhead obstructions and power lines; electrocution may occur
without direct contact.
•
Do not operate with any of the guards removed.
•
Clear area of all bystanders, especially children, before operation.
•
Keep all workers away from the intake of conveyor while machine is running.
•
When cleaning out corners of truck box, do not lean over the conveyor intake. Do
not use hands or feet to clean out intake hopper.
•
Do not use downspout as a support. Stay clear of discharge end.
•
The machine is closely balanced. Do not move grain unless the intake end is
anchored or the discharge end is supported to prevent upending.
•
Set park brake on tractor before starting.
•
Use extreme caution when running conveyor at maximum height. Conveyor should
always be transported at lowest position, never at maximum height.
•
Operate conveyor on level ground free of debris. If ground is uneven, anchor the
conveyor to prevent tipping or upending.
•
Always work with a second person around conveyor in case of accident.
•
Do not run conveyor at high speeds when it is empty.
•
Be familiar with the machine hazard area shown in Figure 3. If anyone enters the
hazard area, shut down the machines immediately. Clear the area before
restarting.
!
9
Summary of Contents for FC1535
Page 8: ... Figure 2 Transport Safety Zones 8 ...
Page 39: ... 39 ...
