www.SafetyGrip.com | Page
3
PRODUCT INFORMATION
Titan Balance Assist Pole comes with our patented Interlocking SafetyGrip®.
Titan poles are protected by AlphaSan
®
technology, which provides lasting protection against microbial
contamination to all Hartmobility Inc products, delivering unrivalled anti-microbial performance.
•
Titan poles are assistive products that may be affixed between floors and ceilings.
•
The Titan pole is a tension mount stability and positioning aid that will be subjected to significant lateral
(sideway) loads when in use. It is your responsibility to ensure that the Titan pole is correctly installed and
maintained as per these
ASSEMBLY INSTRUCTIONS
provided.
•
Titan poles have 6 inches of height adjustment and are designed for installation where the ceiling height is
between 7’-9” to 8’-3” (235 – 250cm). For higher ceilings see the TSGA604 Height Extension Kit.
•
The Titan pole is designed to assist with balance, positioning and stability support for persons weighing up to
300lbs (136kg) and is not designed to bear the full weight of the user.
•
The Titan pole is not suitable for use by persons over 300lbs (136kg). Please refer to TSG650 Safety Grip®
pole for our 500lbs (230kg) rated weight capacity pole.
•
Do not use the Titan pole with a waterbed or inflatable bed.
INSTALLATION
Floor & Ceiling Requirements
The floors must be solid level floors. The ceilings are a solid structure or have ceiling joists. The Titan pole
must only be installed in locations where the construction of the ceilings and floors are structurally sound.
1.
Titan transfer poles should never be installed on loose floors (rugs, mats) or irregular floors.
2.
When the Titan poles are installed in wet or slippery conditions, or where base could move the Floor
Base item 4 should be permanently fixed to the floor. Additional Securing methods
are shown below.
3.
Do not install near heating/cooling vents or lighting where the structural integrity
of the ceiling has been compromised by the holes cut for these vents and lighting
4.
Do not install Titan poles on any suspended ceilings.
STEP 1: Join the Ceiling Disc with the Upper Tube
Put the Ceiling Disc Item 3 on the floor. Take the Upper Pole Tube Item 1 and screw it into
the Ceiling Disc clockwise and tighten firmly.
STEP 1
