Page 2 | KRATOS CAPTO V GRAB BAR with SafetyGrip® KCVSG750
PRODUCT INFORMATION
Kratos Capto V Grab Bars comes with our patented Interlocking SafetyGrip®.
Kratos Capto V Grab Bars are 304 stainless steel incuding all Hardware-Rustproof.
The Capto V Grab Bars are protected with AlphaSan
®
technology, which provides lasting protection against
microbial contamination to all HartMobility Inc products, providing unrivaled anti-microbial performance.
The Capto V Grab Bars are assistive products that may be permanently affixed to any flat surface. Suitable for use
anywhere that a Grab Bar is needed, they come in a variety of lengths and are equipped with oval-shaped mounting
plates that allow them to be installed horizontally, vertically, or at any angle.
WARNING:
FALL HAZARD. Attach the grab bar securely to the wall. Failure to do so could result in death or
serious injury.
•
All Grab Bar mounting plates MUST be properly secured to the wall. Ideally, All Grab Bar mounting plates
should be anchored to a wall stud.
•
If you are unsure that you can properly install the grab bar, hire a qualified professional.
Compliance:
ADA Compliant
INSTALLATION
STEP 1: Locate The Wall Studs Where You Want To Mount The Grab Bar
•
First put on Safety glasses. Locate the wall studs.
•
You may need to rotate the mounting plates to align with the wall studs. To do this, slightly loosen the screw
that holds the mounting plate to the Grab Bar, turn the mounting plate appropriately, and then re-tighten the
screw.
•
When wall studs are not suitably spaced for where you want your Grab Bar you will need either:
a. Blocking
b. Wall reinforcement
c. To use the correct drywall fasteners
NOTE:
Dry wall fasteners are not supplied in this kit.
