17
19.
Lay the mattress on the chain frame. Pay attention to
the correct position of the mattress, especially the front
edge. The front part of the mattress contains a softer
insert.
Mattress front = 40 mm distance from the 1st loop.
Rev:
Novembre 12 2018
Pease
destroy older
assembly drawings!
We do not assume any liability in cases of non-adherence to the assembly manual.
- We reserve the right to make modifications -
The statutory warranty period applies!
For reasons of appearance, a cover strip can be fitted
to the mattress support board.
This must be made by the cabinet manufacturer.
Alfred-Nobel-Straße 9
32584 Loehne - Germany
Tel.: +49 57 32 - 99 22 60
Fax: +49 57 32 - 99 22 61
internet: www.belitec.de
e-mail: [email protected]
