6
Guided Tour - VX3500 Rear Panel
Hartke Systems
Distributed Exclusively by
Samson Technologies Corp.
Hicksville, New York 11802
MODEL 3500
350 WATTS
8
= 240 WATTS
4
= 350 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL. TO
PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED
IN R.O.K.
SERIAL NUMBER
EFFECT
SEND
RETURN
BALANCE
DIRECT OUT
0
SEND
RETURN
POST
PRE
NORMAL
GND LIFT
~ AC INPUT
115V/230V 50/60Hz
FUSE
8A/250V, 300W (115V)
4A/250V, 740W (230V)
2
1
4
3
5
8
9
3
6
7
10
SPEAKER
OUTPUT
MINIMUM
IMPEDANCE
4 OHMS
1. Fuse sled
- This contains a fuse holder and shows the currently selected
voltage rating for your Model 3500. Make sure the voltage rating is correctly set
before powering up the amplifier! Fuse ratings are 8 amp for 115 vac and 4
amp for 230 vac. For information on how to change the voltage rating, see
Appendix C on page 18.
2. AC input
- Connect the supplied standard 3-pin “EEC” plug here.
3. Speaker output
– The VX3500 internal speaker system is connected here.
WARNING:
In order to get the full 350 watts of power and the maximum output
volume, the VX3500’s internal speaker system has an impedance of 4 ohms. Do
not connect additional speakers to the SPEAKER OUTPUT, unless you discon-
nect the internal speakers. Connecting external speakers without disconnecting
the internal speaker system may result in serious damage to your amplifier that
will not be covered under the warranty.
4. Fan
- The fan provides vital cooling to your Model 3500. Make sure that it is
kept free of all obstructions and that cool, fresh air is accessible at all times.
Also, try to ensure that the Model 3500 is used in a dust-free environment.
