4
Step 6
It's time for the fun part! Attach the 1x4's around the box and top
using brad nails or screws.
You can either be super fancy and miter the corners or just simply
install them as butt joints.
Step 7
Continue attaching the shiplap to all 3 sides until you reach the top.
Step 8
You will also install the 1x4 as the "countertop" portion and on the
back wall. You could use thicker wood or any other material that fits
your theme!
Step 9
Once the beer bar is built, use the 1 ½” hole saw to make an opening for the handles to fit through.
You can have however many handles you want, but we are going to have two.
Project Plans:
Keg Beer Wall
