Page 2
Code:
Product:
Assembly Instructions
1
Lay the Frame (2) upside down in order to attach the Seat Supports (1) as shown in Fig 1a. Secure with Two M8x25mm
Set Screws S/S (7), Two M8 Skiffy Washers(8) and Two M8 Nyloc Nuts (6). Cover with the M8 Nut Cap (10)
2
Align the Seat Slats (3) with the corresponding holes in the Seat Support Frame (2) as shown in Figure 2a. Secure the
slats in place using the fasteners that were supplied with the pre-fitted slats. Cover with the M8 Nut Cap (10)
Fig. 1
2
5
6
10
8
10
8
6
7
Fig. 1a
Fig. 2
Fig. 2a
Please note: Remove bolts from the pre-
assembled seat slats before fitting the
supports.
SHE-300
2.4m Freestanding Team Bench
