13
Replacing Baffles
Replacing baffles is a simple task and can be carried out by the user.
Replacing all baffles, except Tarras (MKI) and ECR NoVo
Remove side bricks from the fire
Pull the old baffle out of the locater hole in the rear of the fire
Allow the front of the baffle to drop forward and down to the bottom of
the fire
Rotate and remove through the door
Reverse process to install new baffle
Note; Air holes should be facing down
Replacing the Tarras (MKI) baffle
Raise the front brick and position on top of the rear
Lift the left hand side of the s/s triangular tube and pull the right hand
side out of the hole, this will release it, lower one side and remove
The bricks are now able to be removed
Place new bricks back in place on the ledge with the front brick on top of
the rear
Drop in new air tube
Reposition the front brick in place on top of the new air tube
Replacing the ECR NoVo baffle
Remove both side panels using an allen key
Remove nut from behind the panels to release the baffle and brick
bracket
Remove the bracket and remove side fire bricks followed by the rear
Drop the baffle into the lower firebox, rotate and remove
Insert new baffle
Reverse process to complete the process
