Harris RF-7800W-OU49 series, Installation & Operation Manual

Page: 65 / 87

3-34
RF-7800W
SYSTEM ADMINISTRATION AND CONFIGURATION
R
3.10.6 System Log
Important events that occur during the course of the radio's operation are logged. Messages can be viewed either
through the GUI and CLI or they can be logged to a central network SysLog server. See
Figure 3-19 .
3.10.7 BIT
The radio contains Built-In-Test (BIT) hardware diagnostics that allows an Administrator to diagnose specific
problems with the unit. The radio is continuously monitoring the status of the RF ports for high Voltage Standing
Wave Ratio (VSWR), which could indicate a problem with propagation or with the antenna and associated cabling.
3.10.8 Reboot
Occasionally, an Administrator may wish to remotely reboot the radio. All three management interfaces provide the
ability to do this.
Figure 3-19. System Messages
GUI CLI SNMP
GUI CLI
GUI CLI SNMP