Harris Intraplex STL-160 Series, Installation & Operation Manual

Page: 15 / 178

1 – Introduction ACS-160 Series & STL-160 Series T1 Multiplexer Installation & Operation
Version 2.11, August 2011
Harris Corporation 1-3
Intraplex Products
The ACS-166 and ACS-169 product packages each provide two T1 terminal multiplexers in a single
shelf. The multiplexers share the same power supply and alarm reporting system but are otherwise
independent; there is no communication between the two T1 circuits.
Note: Unless otherwise specified, all references to the ACS-163 multiplexer also apply to the ACS-
167 multiplexer, all references to the ACS-165 multiplexer also apply to the ACS-168
multiplexer, and all references to the ACS-166 multiplexer also apply to the ACS-169
multiplexer.
Figure 1-1. ACS-163, ACS-165, and ACS-166 Multiplexers, Front View (with cover)
INTRAPLEX
STL HD
Figure 1-2. STL-163, STL-165, and STL-166 Multiplexers, Front View (with cover)
Figure 1-3. ACS-167, ACS-168, and ACS-169 Multiplexers, Front View (with cover)
1.4 Multiplexer Component Parts
1.4.1 Main Equipment Shelf
The main equipment shelf is 19" wide rack-mount, 5¼" high for a 3RU multiplexer or 1¾" high for a
1RU multiplexer. This equipment shelf has slots for
● Plug-in common modules
● Channel modules
● Module adapters
● Power supplies
Warning! All common modules, channel modules, and power supplies must be inserted so that the
white eject tab is at the bottom in a 3RU shelf and at the right in a 1RU shelf.