Harris FR6822+ Installation And Operation Manual Download Page 114

Page: 114 / 128

Important Safety Instructions

6800

Series Safety Instructions and Standards

Safety Symbols

On Product

In Manuals

DANGER

—Indicates a hazard for high voltage, fire, or personal injury

immediately accessible as one reads the marking

WARNING

—Indicates a personal injury hazard that is not immediately

accessible as one reads the marking

CAUTION

—Indicates a hazard to property including the product or the

need to take attention and refer to the manual

Protective ground (earth) terminal

Fuse—Replace with the same type and rating of fuse.

Observe precautions for handling electrostatic-sensitive devices.

WARNING

statements identify conditions or practices that can result in

personal injury or loss of life. High voltage is present. Uninsulated

dangerous voltage within the product’s enclosure may be sufficient to

constitute a risk of electric shock to persons.

CAUTION

statements identify conditions or practices that can result in

damage to the equipment or other property. Important operating and

maintenance (servicing) instructions are included in the literature

accompanying the product.

6800+ Safety Manual.book Page 2 Wednesday, November 16, 2011 4:27 PM

Summary of Contents for FR6822+


























































































































Search results

Summary of Contents for FR6822+

Reviews:

Brands by name

Popular brands

Harris FR6822+, Installation And Operation Manual

Search results

Summary of Contents for FR6822+

Reviews:

Brands by name

Popular brands