3.2 Harris e-Core and Sample Preparation
3.2.1
First time users insert the correct international plug set (NA,
UK, AUST or EU) into the power supply. See section 6.0.
3.2.2
Set up the work area. For use with an FTA card, place card
on top of Harris Cutting Mat.
3.2.3
With the e-core unplugged and the cover cap on the tip,
make sure the Harris Micro-Punch tip is “finger tight” on the drive
shaft of the e-Core by firmly holding the knurled surface of the drive
shaft in the fingers of one hand and tightening the tip in a clockwise
motion with the fingers of the other hand. The tip may loosen with
prolonged coring and may need periodic finger tightening.
3.2.4
Remove protective cover cap from Harris Micro-Punch Tip
by gripping the knurled surface of the drive shaft with one hand and
gently removing the cover cap off the tip with a rocking motion.
3.2.5 You may now plug in the Harris e-Core
8
Summary of Contents for e-Core
Page 20: ......
