For detailed troubleshooting information, refer to Chapter 7 in the
Aurora Reference Manual
.
6
BER is high; too many
errors.
1) Check and make sure that the Transmitter Spread Sequence at
the far end matches the Receiver Spread Sequence at the near
end of the hop.
2) Rotate the polarization of the antenna at both ends of the link by
90 degrees.
3) If still no improvement is achieved after step 2), use the Aurora
5800 utility software and change the transmit and receive spread
sequence numbers.
www.microwave.harris.com/cservice/
Harris Corporation
350 Twin Dolphin Drive
Redwood Shores, CA USA 94065
Copyright © 1999 Harris Corporation
USA 1-800-227-8332
Int’l (+1) 650-594-3800
