APM6800
+
/APM6801
+
Installation and Operation Manual
23
Copyright © 2008-2009, Harris Corporation
Chapter 3: Configuration and Operation
Viewing Software and Hardware Versions
You can see the current software and hardware versions of the
APM6800
+
/APM6801
+
module. In Navigator, right-click the name of the
module in the Navigator Window, and then select
Configuration
. A dialog box
appears with the version information.
In addition, you can view the software and hardware versions in CSS-enabled
control panels.
Selecting the Module Locking Source
By using the Lock Source Select parameter, the module can be locked to any of
the following lock sources:
•
Genlock
•
DARS
•
Dolby Decoder Source (for APM6800-D1
+
D/APM6801-D1
+
D, this is
Input
AES 1–8)
•
Dolby Encoder Ch 1 Source (for APM6800-D2
+
D/APM6801-D2
+
D and
APM6800-D3
+
D/APM6801-D3
+
D, this is Input AES 1–8)
The Lock Source status parameter reports the locking source of the module.
When the module locks to either Genlock or DARS, it attempts to use DARS
for AES 11 compliance first. If DARS is not present, the module then attempts
to use the reference video for AES 11 compliance if the reference video frame
rate is either 25 Hz or 50 Hz.
When the module locks to AES 1–8, the module uses the same AES input signal
for AES 11 compliance at the output. In this case, the DARS signal is not used,
even if it is present. If DARS or reference video needs to be used for AES 11
compliance, use either Genlock or DARS as the locking source for the module.
Audio Test Tones
describes the frequency and levels of each audio output test tone
option that are available in the following parameters:
•
Output AES 1A–8B
•
Dolby Encoder In 1–8 (APM6800-D2
+
D/APM6801-D2
+
D and
APM6800-D3
+
D/APM6801-D3
+
D only)
•
Neural Audio In 1-8 (APM6801UM
+
D, APM6801DM
+
D,
APM6801MM
+
D, APM6801LC
+
D, APM6801LC
+
6
+
2
+
D,
APM6801LC
+
8
+
D, APM6801LC
+
DM
+
D, APM6801UM
+
LC
+
D,
APM6801DM
+
LC
+
D, and APM6801MM
+
LC
+
Donly)
Summary of Contents for APM6800+
Page 2: ......
