Harris APM6800+, Installation And Operation Manual

Page: 17 / 114

APM6800
+
/APM6801
+
Installation and Operation Manual 3
Copyright © 2008-2009, Harris Corporation
Chapter 1: Introduction
Table 1-1 on page 3 briefly describes the LEDs, switches, and jumpers.
Table 1-1. Generic Module Features
Feature Description
Module status LEDs Various color and lighting combinations of these LEDs
indicate the module state. See
“LED Status Indicators” on
page 65 for more information.
Mode select rotary
switch This switch selects between various control and feedback
parameters.
Navigation toggle switch This switch navigates up and down through the available
control parameters:
• Down : Moves down through the parameters
• Up : Moves up through the parameters
Control LEDs Various lighting combinations of these Control LEDs
(sometimes referred to as “Bank Select LEDs”) indicate
which bank is currently selected. See
“Bank Select LEDs”
on page 21 for more information.
Monitoring LEDs Each 6800
+
module has a number of LEDs assigned to
indicate varying states/functions. See “Module Status LED
Descriptions” on page 66 for a description of these LEDs.
Local/remote control
jumper
• Local : Locks out external control panels and allows
card-edge control only; limits the functionality of remote
software applications to only monitoring the
APM6800
+
/APM6801
+
.
• Remote : Allows remote or local (card-edge)
configuration, operation, and monitoring of the module.
See page 15 for more information on jumpers.