Harper TURBO VAC 60R-HD, Operator'S & Parts Manual

Page: 13 / 57

Turbo Vac TV60R
Set-Up and Operation
SAFETY WARNING!
Periodically clean material away from
engine to lessen the possibility of fire.
TV60 RHD
1. Before using the TV60R-HD for the first
time, install the battery cable onto the
tractor battery to supply power to the
unit’s valve and RF receiver. Connect
the black wire of the cable to the
negative terminal and the red wire
(with fuse) to the positive terminal of
the battery. When using more than one
tractor, other power cords may be or-
dered (p/n
935071
).
2. Attach the unit to a tractor with a PTO.
Be sure that the Turbo Vac is level with
the ground. (Refer to Adjustments
section.)
3. Attach the PTO shaft to the tractor’s
PTO.
4. Make certain that the case drain hose
is on top of the pump and in a vertical
position when attached to the tractor.
5. Plug quick connector on battery cable
to the quick connector located on the
tongue of the TV60R-HD .
6. Engage tractor PTO and set to 540
RPM.
11
540 RPM PTO Shaft 1:4 Ratio Gearbox