4
17. BATTERY COMPARTMENT
■
Compartment for the back-up
battery.
CONNECTING THE UNIT
TO POWER
Before plug in the AC power cord to
the AC wall outlet, please make sure
that the voltage of your electricity
supply is same as that indicated on
the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries (not
supplied) into the battery compartment.
Be sure to observe the proper polarity
(the “+” and “-” signs) as indicated
inside the battery compartment.
In case of power failure or interrupted
AC power, the current time and alarm
time settings, the stored radio stations
are preserved in the memory of the unit
by means of battery back-up function.
SETTING THE CLOCK
1. With the unit in CLOCK mode,
press and hold the
CLK / MEM
button for about 1 second, the time
will begin to flash on the display.
2. Press the
HOUR / TUN+
button to
adjust the hour.
3. Press the
MIN / TUN
− button to
adjust the minute.
4. When the correct time is selected,
press the
CLK / MEM
button again
to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode,
press the
AL1/+
or
AL2/−
button.
The ALARM time will begin to flash
on the display.
2. Press the
HOUR / TUN+
button to
adjust the alarm hour.
3. Press the
MIN / TUN
− button to
adjust the alarm minute.
4. When the desired alarm time
is selected, press the
AL1/+
or
AL2/−
button to confirm.
5. Press the
AL1/+
or
AL2/−
button
to select the ALARM sound
mode - buzzer or currently set
radio station. The alarm buzzer or
radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or
buzzer) activates, it can be
temporarily suspended for a short
period of 9 minutes by pressing
the SNOOZE button once.
2. The buzzer or radio will then
automatically activate again after the 9
minutes SNOOZE period has ended.
3. This procedure can be repeated
for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the
SOURCE / AL. OFF /
button to turn
off the Alarm.
