Harper Butler Arm Bed A84X84, Manual, Page: 15 / 39

Arm Bed
13
White wire attaches to orange wire the con-
nects to the actuator on motor start solenoid.
15 amp resettable/replaceable fuse attaches
to input on motor start solenoid.
All seven wires.
If the transmitter does not function when turned
on for the first time, disconnect the power sup -
ply to the receiver that’s mounted inside the
tool box and then reconnect. This opens a
20 second window for registration. When you
see the LED light flashing inside the receiver,
PRESS and HOLD the green button on the
transmitter (remote) and the F1 button. Con-
tinue to hold BOTH buttons for a minimum of
5 seconds during the 20 second period. Keep
holding down buttons and if the transmitter is
successfully registered, you will see the LED
light illuminate solid for 3 seconds. First re-
lease the F1 button and then the green button
within the 3 second period.
Mega Fuse & Fuse Box (not included)
The 250 amp (arm bed) or the 200 amp (spike
bed), Mega Fuse and fuse box should be
installed on the power cable