10/20
|
11
INSTALLATION MANUAL MULTIFUNCTIONAL SURFACE MOUNTED ROLLER SHUTTER VR150
Secure the fastening bolts of the guide rails and if possible also screw the consoles
tightly into the wall (and for larger dimensions also the box).
A (1 : 2)
5.8. Connections
Motor:
•
For motorised operation, the electrical connections must always be made according
to the applicable directives of the country where the shutter is being fitted.
With each motor the necessary diagrams (wiring diagram and alignment directives)
and installation instructions are included depending on the motor type and/or home
electronics accessories selected.
Wiring diagram for the standard OXIMO motor:
Attention!
Before connecting the motor make sure the power is disconnected.
a
Blue
Zero
b
Brown
Phase S1
c
Black
Phase S2
d
Green/Yellow
Earthing
Attention!
With a DVC with center conductor 120 or 121, in combination with an Oximo or
RS100 motor, the top point must be adjusted with the transmitter.
