MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
34
STEP 5
Cut away the joint at the top of the guide rail, where the entry guide of the
guide rail can be found.
STEP 6
After both guide rails have been fitted onto the window, lower the entire box onto
the guide rails (Fig. 13), ensuring the pivots of the side console fit into the guide rail.
5.5 A reverse installation
The roller shutter can be fitted in the reverse position, but beware!
When closed (panel downwards), access to the box is only possible from the inside.
Ensure it is possible to open the window from the inside.
Figure 11:
remove the joint
with a Stanley knife
Figure 12:
carefully lower the box
onto the guide rails
Figure 13:
mounted box
