Harol NV – Industriepark 3 – 3290 Diest – Belgium - +32 (0)13 38 01 11 –
– www.harol.com
Product no: 050442
V03-04/18
Replacing the power supply and receiver for LED lighting with BX270
Prod. Nos.:
050436 - Set power supply BX270 LED - standard
050437 - Set power receiver BX270 LED – RTS
050438 - Set power receiver BX270 LED – IO
063859 - Set power receiver BX270 LED – IO dimmable
Use the test LED strip to check that the power supply is working.
Ensure the power to the awning is always completely switched off when working on the electrical connections.
1.
Removing the existing power supply and receiver:
a.
Remove the side guard by unscrewing the
screws behind the HAROL logo, so that the
power supply, and if present, the receiver
are easily accessible.
b.
Disconnect the connector and cables on
the 24V and 230V side.
c.
Remove the faulty power supply/receiver.
2.
Fitting the new power supply/receiver:
a.
Clean pulley plate and tighten power supply
screws.
b.
If necessary, glue the receiver or attach with
a Colson cable tie.
c.
Connect the 24V output with the LED
strip via the connector.
d.
Connect 230V, 3m cable has been
provided.
e.
Put back the side guard and HAROL logo.
3.
Testing
Turn the power back on and test the system.
Follow the sender guide to incorporate one or more receiver controls.
