3
Winter-ready
1.
Turn off the water supply and disconnect the hose from the shower.
2.
Turn on the valve of the shower in “hot” (Red) and let the water run for 4-5 minutes until the
pipe is empty.
Note:
Do not change the setting of the valve. This prevent the pipe from going empty.
3.
Place the shower inside on a warm and dry location during the winter.
Warnings
1.
DO NOT USE SALT WATER OR ANTI-FROST PRODUCTS
2.
RECOMMENDED WATER PRESSURE: 3.5 BAR
3.
START THE SHOWER IN THE “COLD” POSITION (BLUE) TO PREVENT BURNS.
