please turn off the Car Kit if not in use because excessively long time standby may cause
permanent damage to the internal battery.
3. Volume Control: Long press + / - to adjust volume up / down, short press + / - to switch
music play Prev/Next.
4. Call Key: Answer or reject a call.
5. Mute Key: Mute the microphone, also for play and pause, and enter into pairing status
any time.
6. Microphone: Transmit sound to the caller, advised to be within 50cm of distance
otherwise the volume for the caller may be relatively low.
7. Working Status Indicator: Indicate different working status of the Car Kit.
8. Loudspeaker: The Car Kit is to be installed on the Sun Visor on top of your head, if the
voice is clear enough it is advised to turn down the volume of the speaker not at its
maximum, excessively high volume might sometimes cause interference.
Charging the Device
Before the first use of the Car Kit, please fully charge it, the estimated time for full charge
is around 120 minutes.
Connect the charger to the car kit through the Micro USB charging port, in charging status
the RED LED indicator would be on (if the device is not in use for long time it may take up
to 30 minutes for the RED LED indicator to be on); the RED LED indicator goes off when
the device is fully charged.
Note:
1. Internal battery cannot be replaced.
2. It may cause noise interference when the device is used during charging.
3. Please confirm output voltage within 4.5V-6V when using other USB charger.
4. Please do not charge the device within 10 seconds after it is powered off, the
device needs time to adjust the working status.
Tips: You can charge the Car Kit at any time, no need to wait for the battery to be
completely exhausted. In order to maintain the battery in good condition it is advised for
users to charge the device within one month when it is completely out of power. If the
device is not in use for a long time, it needs to be charged in 3 to 6 months to ensure the
battery in normal condition, otherwise it may cause permanent damage to the device.
Basic operations
Power ON/OFF
Turn ON the Bluetooth car kit at the ON/OFF switch, or short press the Call Key to turn
into the power ON status, you will hear the voice instruction "Power ON" .
Before the first time pairing, when the device is turned ON the RED and BLUE LED
indicators flash alternately; after the success of first time pairing the device can be
automatically connected with the mobile phone, thus when the device is turned ON the
BLUE LED indicator flashes once per second to indicate the connected status.
