TECHNICAL DATA:
Power: 230V, 50Hz
Capacity: 2000W
NOTICE:
·
Do not switch on before checking that voltage on the specification
plate is the same as that in your home.
·Switch off when not in use, even for a moment.
·If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or a similarly qualified
person, in order to avoid
hazard
.
·For additional protection, the installation of a residual
current device with a rated residual operating current not exceeding
30 mA is advisable in the electrical circuit supplying the bathroom.
Ask your installer for advice.
·Never wet or submerge the dryer in water.
·
WARNING
：
When the hairdryer is used in a bathroom, unplug
it after use, since the proximity of water presents a hazard, even
when the hairdryer is switched off.
HOW
TO
USE
·
Make sure that your hands are completely dry before plugging in.
·Plug in and set switch ( A
）
to the required position. Setting 1: gentle
air flow, setting 2: strong air flow.
·Once the curl is styled, switch to the cool phase for 15-20 seconds,
to give more body to you style and make it longer-lasting.
Once your hair is dry, set the switch ( A
）
off and
unplug the dryer.
USING THE CONCENTRATOR
（
D
）
·The adjustable air concentrator
（
D
）
allows you to
direct air flow to a
particular point.
·
This attachment is recommended for drying or styling local areas,
particularly when using a brush or rollers.
COOL
PHASE
·
If you style your hair with a brush, start with hot air, rolling the lock
and heating the curl.
·For cool air, hold key
（
C
）
down. Styling is more effective
with the air
concentrator
（
D
）
.
·The cool air setting
（
C
）
reduces the
temperature
consider-
ably and allows the hair to cool rapidly following warm setting.
SAFETY
·Ensure that the air inputs and outputs are not blocked.
·If that does happen, thermal temperature limiter guards
against overheating.
