1 8
7. Buckle the vehicle seat belt into place and ensure it is secure by gently pulling
on it.
!
BOTH SIDES OF THE LAP BELT MUST PASS UNDER BOTH ARMRESTS, AND
THE LOWER END OF THE SHOULDER BELT MUST PASS UNDER THE ARMREST
ON THE BUCKLE SIDE.
!
Any straps holding the restraint to the vehicle should be tight, any straps
restraining the child should be adjusted to the child’s body, and all straps should
not be twisted.
!
NEVER USE A VEHICLE LAP-ONLY BELT WHEN USING THIS BOOSTER SEAT.
TO REMOVE
Remove harness system.
HEADREST:
1. Gently slide fabric downwards off the top of the headrest.
(34)
.
BACKREST:
1. Undo the fabric hook-and-loop fastener tabs (x2)
(35)
along the bottom sides
of the backrest (where the backrest meets the base).
2. Gently slide fabric cover off the backrest.
3. Remove EPE foam from backrest fabric.
BASE:
1. Undo the snaps (x2) behind the seat
(35)
as indicated.
2. Gently slide the fabric cover off the plastic base from the back of the child
restraint towards the front of the seat.
TO INSTALL
To reinstall fabric covers, repeat previous steps in reverse order.
!
CAUTION
: Reinstall harness system if applicable.
We recommend that you store your instruction manual in the mesh pocket
provided under the fabric on the side of the child restraint.
R E M O V I N G / I N S TA L L I N G FA B R I C S E AT C O V E R
I N S T R U C T I O N M A N U A L S T O R A G E
