TO REMOvE SEAT COvER
TO INSTALL HEADREST SEAT COvER
•
Gently grasp the back of the fabric seat pad and slide
the cover off the plastic shell from the back of the
booster seat towards the front of the seat.
•
Lay the backrest plastic shell flat - facing upwards.
•
Insert EPE foam piece into headrest fabric ‘pocket’
and place side supports into the fabric.
•
Ensure that the WHITE energy absorbing foam pieces
are laying properly against the plastic shell.
•
Thread Velcro fabric extensions through the headrest
belt guides and secure Velcro to underside of fabric.
•
With the entire backrest lying flat, wrap one side
of the fabric (and EPE foam) over the white foam
and shell until properly in place. Do the same with
the other side. Properly place all the fabric, and
secure the fabric by attaching the snap on the rear of
headrest.
22
