Harmonic MediaGrid Installation And Configuration Manual Download Page 224

Page: 224 / 358

Chapter 8 Hardware Reference

224

Harmonic MediaGrid Release 4.1

ContentDirector 1000F and High Performance ContentDirector 2000C

Figure 8–1: ContentDirector Front Panel

System Status LEDs

Figure 8–2

and

Table 8–2

detail the four system status indicators on the front of the ContentDirector.

Figure 8–2: ContentDirector Front Panel Indicators

Table 8–1: ContentDirector Front Panel Descriptions

Indicator, Button, or

Connector

Description

1. Power indicator

A bright blue

power indicator

is provided across the top of the

front panel. This indicator also provides a “wink” function, which
allows you to identify a unit from the SystemManager application.

2. Air vents

Allows airflow through the unit. For optimum airflow, do not
obstruct the air vents.

3. Status LEDs

An array of four

status LEDs

is provided on the front panel. See

the following figure and table for descriptions of each status LED.

MediaGrid

ContentDirector

Public NIC

Private NIC

SSD 0

SSD 1

Both connections are good

White

Both connections have failed

Red

Yellow

Public: NIC 0 connection failure
Private: NIC 2 connection failure

Public: NIC 1 connection failure
Private: NIC 3 connection failure

Magenta

Public and Private NIC Indicator

SSD Indicators

Drive online

White

Drive failure

Red

Yellow

Drive replacement
warning

Summary of Contents for MediaGrid





































































































































































































































































































































































Search results

Summary of Contents for MediaGrid

Reviews:

Brands by name

Popular brands

Harmonic MediaGrid, Installation And Configuration Manual

Search results

Summary of Contents for MediaGrid

Reviews:

Brands by name

Popular brands