Harmonic Ellipse 3000, User Manual

Page: 77 / 403

Chapter 4 Transport Stream Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 77 Ellipse 3000 Release 3.0, Rev. B
Services Sub-Menu/Tab
4.2 Services Sub-Menu/Tab
The Transport Stream Services Menu contains control tools for the services encoded in the
transport stream and for managing the service configuration parameters. The information
provided in this section is divided into the following subjects:
■
Service Management, which manages the services in the transport stream. Refer to 4.2.1 TS
Service Management on page 77 for details.
■
Service Configuration Management, which manages the configuration of the service. Refer to
4.2.2 TS Service Configuration on page 81 for details.
■
Scrambling Management, which manages the scrambling of the service. Refer to
4.2.3 TS Scrambling Management on page 83for details.
■
Stream PID management, which manages the elementary streams in the service. Refer to
4.2.4 Add and Drop PID on page 90 for details.
4.2.1 TS Service Management
The Service management tools provided in the Transport Stream Service Menu enables displaying
the list of available services, adding services and dropping services from the stream.
The available options are:
■
Service List Menu – Lists the available services in the encoder (see 4.2.1.1 Listing Available
Services on page 78).
■
Add Service Menu – Enables the user to create and add services to the encoder from the
transport stream (see 4.2.1.2 Adding a Service on page 79).
■
Drop Service Menu – Enables the user to remove (drop) a service from the encoder (see
4.2.1.3 Drop a Service on page 80).
Front Panel:
To access the Services menu on the front panel:
❖
Navigate
Root > Configuration > Transport Stream > Services
.
Services
1 Service List
2 Add Service
3 Drop Service