SAFETY GUIDE
2
1
2
3
4
5
6
7
8
9
10
11
付
SAFETY NOTE
CAUTIONS FOR ACTUATORS AT APPLICATION DESIGNING
Always use under followings conditions:
The actuator is designed to be used indoors. Observe the following
conditions:
・
Ambient temperature: 0
℃
to 40
℃
・
Ambient humidity: 20% to 80%RH (Non-condensation)
・
Vibration: Max 24.5 m/
S
2
・
Impact: Max 294 m/
S
2
・
No contamination by water, oil
・
No corrosive or explosive gas
Follow exactly the instructions in the relating manuals to
install the actuator in the equipment.
・
Ensure exact alignment of motor shaft center and corresponding
center in the application.
・
Failure to observe this caution may lead to vibration, resulting in
damage of output elements.
・
Electrostatic discharge may destroy encoder elements, therefore, we
recommend that installation be performed under the environment
where the relative humidity is 40 to 70 % RH.
CAUTION FOR ACTUATORS IN OPERATIONS
Never connect cables directly to a power supply socket.
・
Each actuator must be operated with a proper amplifier.
・
Do not directly apply a commercial power supply. Failure to observe
this caution may damage the actuator, resulting in fire.
Do not subject the actuator to impacts and shocks.
・
Do not use a hammer during installation as an encoder is directly
connected to the actuator.
・
Hitting the actuator may damage the encoder, causing uncontrollable
or faulty operation.
Avoid handling of actuators by cables.
・
Failure to observe this caution may damage the wiring, causing
uncontrollable or faulty operation.
Keep limited torques of the actuator.
・
Keep limited torques of the actuator.
・
Be aware, that if arms attached to output element hits by accident an
solid, the output element may be uncontrollable.
CAUTION
WARNING
CAUTION
