TEC0017 23Jan2015 P/N: 630-00027-01 revC
SL400 • Vantage Stair Lift Installation Manual
33
Vantage Stair Lift
MANUAL LOWERING TOOL
1. Turn the lift off at the power switch.
NOTE: Disconnecting the power supply does not
turn the lift off. The power supply only charges
the batteries.
2. Remove the round plastic plug on the end of the
chassis to access the end of the motor shaft.
[Figure 32-1]
3. Place the manual lowering tool onto the end of
the motor shaft and rotate until the final limit switch
becomes disengaged.
4. Re-install the plastic plug and turn the lift "ON".
MANUAL LOWERING TOOL
CAUTION
If the lift is inoperable because it has driven onto the final limit switch or has run out of
power, it has to be manually moved off the final limit
