Pinnacle Stair Lift Manual |
| www.Harmar.com
5
Controls and Stair Lift Operation
CONTROLS
• The red “ON/OFF” switch is located on top of the carriage. This switch is normally left in the “ON”
position (I). This switch can be turned “OFF” if you do not expect to use the lift for an extended period of
time. Ensure that the lift is in the charging position.
• The main “UP/DOWN” control switch is located at the front of one armrest. Use this switch for normal
operation of the lift while in a seated in a secure position.
• There are “UP” and “DOWN” buttons on the remote call/send hand control units.
• Three is a three-color LED indicator light on one armrest.
• Some units are equipped with an optional key switch located at the back of one armrest. Turn this
off and remove the key when you want to ensure the lift cannot be used in your absence.
STAIR LIFT OPERATION
CAUTION! Do not carry pets or children on your lap while riding the stair lift. The lift is designed for use
by only one person at a time.
Step 1: To aid entry to the chair, the armrest on the entry side may be raised. When positioning yourself on the
seat at the upper landing, ensure the seat is fully swiveled and locked in position for safety. The seat may be
swiveled by depressing the swivel release handle on either side of the seat. To turn the stair lift on, press the
red “ON/OFF” switch located on the top of the carriage to the “ON” position (I) and ensure that the key switch
(if equipped) is “ON.” When the lift is turned “ON” a green light on the armrest will indicate that the lift is ready
for use.
Step 2: To turn the stair lift on, press the red “ON/OFF” switch located on the top of the carriage to the “ON”
position (I) and ensure that the key switch (if equipped) is “ON.” When the lift is turned “ON” a green light on
the armrest will indicate that the lift is ready for use.
CAUTION! Never attempt to operate the lift while standing up. Always sit in the center of the seat with
the seat belt fastened around your waist.
