SL300 PINNACLE STAIR LIFT:
Owners Manual
19JUNE2020 | 610-00058 REV F
8
OPERATION
PINNACLE STAIR LIFT: SECTION 3
6.
To operate the lift remotely, continuously press
the appropriate up or down button on the call/
send hand control unit. Hand control units are
typically located at the upper and lower landings
of the staircase.
If you are operating the lift remotely on behalf
of another person, please ensure that they are
securely seated with the seat belt fastened.
NOTE: A single beep indicates that the lift has touched an
obstruction. Clear the obstruction before proceeding.
If the lift is parked at the charge station and it is beeping
intermittently it could be because the power supply is not
connected to the AC power.
FOLDING RAIL
Automatic: When ascending or descending the
stairs, the chassis will automatically activate the
folding rail while you are moving and nearing the
hinge. Please ensure there are no people, pets, or
obstructions around the lower landing. To stop,
simply remove your hand from the control and the
folding rail will stop as well.
Between Uses: To keep your landing clear, use the
remote call/send to move the stair lift up into the
stairwell until the folding rail leg is vertical. The lift
will continue to charge in this position. The folding
rail will automatically raise to keep the area clear.
See Figure 3-2.
Figure 3-2