Outlander Vehicle Lifts:
Owner’s Manual
30JULY2020 | 630-00132 REV B
10
OUTLANDER VEHICLE LIFTS:
SECTION 3
OPERATION
UNLOADING THE CHAIR
1.
Insert the key and turn the switch to the ON
position.
2.
Press DOWN on the toggle switch to lower the
lift.
3.
Release/move the hold-down devices that are
not automatic.
NOTE: Make sure any automatic securement devices
are fully disengaged prior to removing the chair from the
platform.
4.
Guide the chair off the platform carefully.
NOTE: Always drive the scooter off the platform in
REVERSE. When the scooter is clear of the platform,
press the UP toggle switch to raise the platform.
STOWING THE PLATFORM
When the mobility device is unloaded, press UP on the
toggle switch and the platform will automatically fold.
See Figure 3-6.
Figure 3-6
SWING-AWAY
The swing-away allows you to easily swing the
installed auto lift away from the back of the vehicle
for convenient access to the trunk/cargo area. If your
device does not have a swing-away, you may purchase
this option from an authorized dealer and have it
added at any time.
NEVER open the swing-away with the chair on the
lift. You will damage the swing-away and the lift and
will potentially damage the vehicle and the mobility
device. Any of these actions will VOID your warranty.
See Figure 3-7.
NOTICE
Figure 3-7
DO NOT leave the lift platform on the ground. Keep
the platform in its stowed position when not in use or
when leaving the vehicle.
NOTICE
