Outlander Vehicle Lifts:
Owner’s Manual
30JULY2020 | 630-00132 REV B
8
OUTLANDER VEHICLE LIFTS:
SECTION 3
OPERATION
LOWERING THE LIFT
1.
Insert the key and turn the switch to the ON
position.
2.
Press DOWN on the toggle switch. The platform
will unfold, as the lift is lowered.
3.
Continue to lower the platform until it reaches
the ground and becomes level.
See Figure 3-2
.
Figure 3-2
POSITIONING THE MOBILITY
DEVICE ONTO THE PLATFORM
1.
Position your mobility device slowly.
2.
Stop positioning when the drive wheels fall
between the wheel cradles or wheel chocks on
the side or center, depending on the lift and chair
model.
See Figure 3-3
.
Figure 3-3
IMPORTANT:
Positioning the mobility device
properly on the platform is critical to ensuring the
device is properly locked onto the lift. Always verify
that the wheels are captured by wheel cradles or
wheel chocks. Please consult your dealer on the
specifics of your application.
DO NOT over-lower the platform to the point where
the vehicle begins to rise. This will damage the lift.
NOTICE
