4
| www.harmar.com | 800-833-0478
TEC0030 30NOV15 PN: 630-00002-01 REV B
Lift Features
ON/OFF Switch
Call/Send Unit
Manual Hand Crank
Power Supply
(located at one
end of the rail)
SAFETY FEATURES
•
Safety sensors on the top and bottom of the carriage, and underside of the platform halt the
lift immediately if any of these edges touch an obstruction. And the LED indicator light will
turn orange. The lift may only be driven away from the obstruction.
•
An interlock on the ramps prevents the lift from being operated unless the ramps are in the
upward position.
Weight capacity:
500 lbs.
Stair angles
32 - 45 degrees
Return trips/charge
20 - 60
Speed
14 feet per minute
Power Supply Input
: 110 VAC; 50-60 Hz /
Output
: 33 VDC; 1.2 Amps
Power Source
24 VDC Battery
Drive
Rack and Worm Gear
Rail
Extruded aluminum
Plastic covers
ABS - flame retardant
Safety Features
Overspeed Governor
Upper and Lower Landing Limits
Upper and Lower Final Limit
Ramp Obstruction Sensors
Under Platform Safety Pan Obstruction Sensors
Drive Chassis Obstruction Sensors
Non-skid Surface
TECHNICAL SPECIFICATIONS
LED Indicator Light, E-stop and
Up/Down Control Switch
