AL003:
Installation/Owner's Manual
22DEC2021 | 630-00096-B
8
INSTALLATION
AL003: SECTION 4
NOTE: If inverting/flipping the ball mount for better
height, the ball mount and swing brackets must be flipped
together.
See Figure 4-2.
Orientation of these parts is important for the tilt away
feature limits.
OR
SWING
BRACKET
Figure 4-2
HOLD-DOWN ARM
INSTALLATION
TIGHTEN
SET
SCREWS
ADJUST TO
DESIRED HEIGHT
INSTALL
HOLD
DOWN
ARM
Hold-down arm height can be adjusted so that the
wheelchair's armrests clear the hold-down arm
when loading onto the tilted platform.
When the platform is tilted upright, the wheelchair's
should barely contact the bottom of the hold-down
arm. See Figure 4-3.
Figure 4-3
The knob on the hold-down arm can be turned to
adjust the pressure on the wheelchair's armrest.
See Figure 4-4.
Figure 4-4
REMOVE,
FLIP,
RE-ATTACH
REMOVE,
FLIP, MOVE UP,
RE-ATTACH
REMOVE,
MOVE UP,
RE-ATTACH
Measure from Hitch Bar to ground
AS SHIPPED
8-12"
10-14"
12-16"
14-18"
ORIENTATION OF Class 1, 2, 3, and 5 HITCH ADAPTERS IS IDENTICAL
