7
B112V2/B110V2 Subwoofer
Quick Start Guide
CONNECTING TO A STEREO RECEIVER,
AMPLIFIER OR PREAMPLIFIER
If you are connecting to a stereo device, connect the subwoofer as
shown below. Stereo components rarely have subwoofer outputs. Use
them if they are available; otherwise, be sure to use a Y-connector for the
left output and one for the right output, connecting the subwoofer input to
one side of each Y and the input for the left or right main speaker amplifier
to the other side of the Y for proper main speaker operation. You can make
either balanced (XLR) or unbalanced (RCA) connections between the
device and the subwoofer.
Using this connection method, you must set the Low Pass Crossover
knob to some frequency between 50 – 150Hz,
NOT
on the “LFE” setting.
Stereo Preamplifier
Use either XLR
or
RCA connector
To amplifier for main speaker
(Repeat for other Channel)
Use Left
and Right
BALANCED
RIGHT
LEFT
LEFT
UNBALANCED
RIGHT
OUTPUTS
A
A
A
A
A
