Installing Wall-Mount (MXD) Panels
49
Modero X® Series Touch Panels - Installation & Hardware Reference Manual
NOTE:
Refer to the Power via 13.5V
for details on wiring a power connection.
8.
Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify that the
panel is receiving power and functioning properly to prevent repetition of the installation.
NOTE:
Do not disconnect the connectors from the touch panel. The unit must be installed with the attached connectors before
being inserted into the drywall.
NOTE:
Configurations that use the limited access USB port on the side of the connector box may require a right angle mating
connector (not included) for connection to the device.
9.
Insert the four temporary mounting posts of the panel into the openings on the Backbox and slide the panel onto the Backbox
(FIG. 33). This will temporarily hold the panel during the rest of the installation.
Note that FIG. 33 shows the MXD-1900L-PAN, but the illustration applies equally to the MXD-2000XL-PAN. Also note that
FIG. 33 shows a landscape panel but the installation of a portrait panel is essentially the same, other than the vertical
orientation.
FIG. 32
MXD-2000XL-PAN / MXD-1900L-PAN - rear connectors
FIG. 33
MXD-1900L-PAN installation (Landscape)
Ethernet 10/100 Port
Type A USB Port
(limited access)
13.5V Power Port
Side cover
4X Mounting post openings
4X Mounting posts
Side cover
6X 4-40 X 1/4" LONG FLAT HEAD
TORQUE TO 5±.2 IN LBS
Note:
Additional detailed installation and product drawings are available to view/download at www.amx.com