9
© 2017 Martin Professional ApS
Martin M2GO HD and M2PC Safety and Installation Guide
Power Connections
The Martin M2GO HD - M2PC accepts AC mains power at 100-240V 50/60Hz. Do not
connect it to power outside this range. Damage resulting from incorrect connection is not covered
under warranty.
North America: A cable with a NEMA 15-5P plug is provided for use with the M2GO - M2PC in the
USA and Canada. This approved cable must be used in North America.
Rest of the world: The provided IEC cable is not fitted with a country-specific plug.
Install only a plug that meets local and national electrical codes and is suitable for the country's
specific power outlet types. Refer to a certified electrician for any questions regarding a country's
specific requirements.
A 3-prong grounding-type (earthed type) plug must be installed following the plug manufacturer’s
instructions. The table below shows some possible pin identification schemes; if the pins are not
clearly identified, or if you have any doubts about proper installation, consult a qualified electrician.
Wire color (standard EU code)
Pin
Symbol
brown
live
L
blue
neutral
N
yellow/green
ground
To apply power to the product:
1. Check the power switch and ensure that it is set to the center
OFF
position.
2. Insert the 4-pin XLR connector from the external power supply unit into the power input on the
back of the desk.
3. Insert the provided power cable into the IEC
connector of the power supply unit and connect the
cable to a properly protected and grounded power outlet.
4. M2PC: Connect the USB cable to the PC system
5. Turn on the desk by toggling the power switch to the
CPU
position (M2GO HD) or
USB
position
(M2PC)
