Harman Martin ERA 800 Performance, User Manual, Page: 23 / 26

Control panel menus
23
INFORMATION
POWER ON TIME 0
...
XXX HR
Display number of hours fixture has been
powered on since manufacture (not
user-resettable)
LED HOURS 0
...
XXX HR
Display number of hours LEDs have been
powered on since manufacture (not
user-resettable)
SW VERSION V.X.X.X
Displays currently active fixture software
(firmware) version
FIXTURE ID 0000 - 9999
User-settable ID number. Use Up and
Down buttons to scroll to the chosen ID
number. Use Enter to confirm.
RDM UID 4D50.XXXXXXXX Displays fixture’s unique RDM ID
TEMPERA-
TURES
LED / BASE
Scroll through current readings on all PCB
temperature sensors
DMX LIVE
STROBE
...
PAN/TILT SPEED
0 - 255
Scroll to see values currently being
received on each DMX channel
MANUAL
CONTROL
RESET
ALL Reset fixture
PAN / TILT Reset pan and tilt only
EFFECTS Reset effects only
STROBE
...
PAN/TILT SPEED
Scroll through effects, then manually
control an effect
SERVICE
PAN/TILT
FEEDBACK
ON
Enable pan/tilt position feedback
system
OFF Disable pan/tilt position feedback system
CALIBRATION
PAN
...
BLADE 4 ANGLE -127 – +128
...
-127 – +128 Scroll through effects, press Enter to
select. Adjust home position and press
Enter to confirm.
LOAD DEFAULTS LOAD Load factory default calibration settings
SAVE SETTING SAVE
Replace factory default calibration settings
with current calibration settings
USB
NO DEVICE / INVALID FILE
No USB device present or no firmware on
USB device
UPDATING FILES
Fixture updating internal memory from
USB device
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 2: Control menus