24
ERA 800 Performance Safety and Installation Manual
3. Holding the new gobo by its edges, insert it into the goboholder with the alignment marks on gobo and
goboholder oriented correctly and with the shiny side facing upwards (see Figure 18). Check that the
gobo is fully seated in the holder.
4. Insert the retaining spring into the goboholder and press it into its groove in the goboholder. Check that
the spring is pressed as flat as possible against the gobo and that the gobo is held securely in the
goboholder.
5. Reinstall the goboholder in the gobo wheel using the section “Replacing a rotating gobo” on page 19 as
a guide.
6. When service work is finished, reinstall the head covers as described using the section “Opening the
head for access” on page 18 as a guide.
Summary of Contents for Martin ERA 800 Performance
Page 1: ...ERA 800 Performance Safety and Installation Manual...
Page 31: ......
Page 32: ...www martin com...
