Harman Martin DMX PowerPort 375 Series, User Manual

Page: 15 / 24

Service and maintenance
15
If one or more of these factors is present, inspect units within their first 25 hours of operation to see whether
cleaning is necessary. Check again at frequent intervals. This procedure will allow you to assess cleaning
requirements in your particular situation. If in doubt, consult your Martin™ dealer about a suitable
maintenance schedule.
Warning! Disconnect from power and allow to cool for 10 minutes before cleaning.
Warning! Do not allow the unit to become wet. Wipe with a damp cloth only.
Attention ! Déconnectez le produit et laissez-le refroidir pendant 10 minutes avant de procéder au
nettoyage.
Attention ! Ne laissez pas le produit se couvrir d'humidité. Nettoyez-le avec un chiffon légèrement
humide.
To clean the DMX PowerPort 375:
1. Disconnect the unit from power.
2. Use a vacuum cleaner and soft brush to gently remove dust and loose particles from the outside of the
unit, paying special attention to the air vents in the front panel.
3. Wipe the outside of the unit with a cloth lightly moistened in a mild detergent solution. Do not splash the
unit with water. Do not use any product that contains abrasives or solvents.
4. Check that the unit is dry before reapplying power.
Installing new software
It may be necessary to upload new software (i.e. device firmware) to the DMX PowerPort 375 if it appears to
have a software-related fault or if you want to update to a newer software version.
To upload new software:
1. Connect a PC running the Martin Companion WIndows application (available from the Martin website at
www.martin.com) to the Internet. Allow the application to automatically download all the latest Martin
product firmware to your PC.
2. Shut down power to the DMX PowerPort 375.
3. Connect the PC running Martin Companion to the DMX PowerPort 375’s DMX IN connector using the
Martin Companion Cable USB-DMX hardware interface available from Martin (see “Related Items” on
page 19).
4. Apply power to the DMX PowerPort 375 and follow the instructions in the Martin Companion application.