background image

9

N

0

5101 STREAMING SACD PLAYER/DAC

  

/

 

 

QUICK START GUIDE

CONTROL

REMOTE CONTROL OPERATION

Battery Installation
Your  N

0

5101  remote control comes with two AAA alkaline 

batteries. To install the batteries, use the included hex tool to 
remove the battery cover, insert the batteries and replace the 
battery cover and hex screws. Be sure to observe proper battery 
polarity. 

Using the Remote Control
When using the remote control, aim it toward the unit’s front 
panel IR receiver. Make sure that no objects, such as furniture, 
blocks the remote’s line of sight to the receiver. Bright lights, 
fluorescent lights, and plasma video displays may interfere with 
the function of the remote.

•  The remote has a range of about 17 feet (5m), depending on 

the lighting conditions.

•  You can use the remote at an angle of up to 45° on either side 

of the unit.

•  Placing the N

0

5101 behind tinted glass will reduce the remote 

control’s effective range.

If the remote control operates intermittently, replace both 
batteries with new ones.

Supported File Types
The following file formats are supported, over disc, USB and 
network:

FLAC  Up to 24 bit/192kHz

WAV 

Up to 24 bit/192kHz

AAC 

Up to 24 bit/96kHz

AIFF 

Up to 24 bit/192kHz

OGG 

Up to 24 bit/192kHz

MP3 

Up to 320kbps/48kHz

WMA  Up to 192kbps/48kHz

Summary of Contents for Mark Levinson 5101




















Reviews: