Page
12
VTX
Series
Laser
Accessories
User
Guide
August
2012
OPERATION
The laser is activated by pushing the contact button on the power supply unit.
Be sure to follow all safety precautions and warnings:
¾
Never look directly into the laser, even when switched off since someone may
activate the unit without warning.
¾
Always warn persons in the venue before powering on the laser and move
people away from the target area before activating the laser.
¾
Always ensure that persons do not enter the laser target area while in use.
¾
Ensure that the power supply unit is readily accessible at all times so that the
laser can be switched off immediately if necessary.
¾
Use the laser for the minimum amount of time, power off and disconnect the
power supply unit as soon as adjustments are complete.
¾
Always ensure that the power supply unit is disconnected when the public has
access to the venue and do not turn on the laser when audience members
are present.
¾
Properly secure the laser unit(s) to the array using the supplied quick release
pin as described in the VTX-LZ Installation section on page 9.
¾
Do not operate the laser while hand holding the laser unit.
¾
Do not use the laser in any manner that may cause accident or injury.
¾
Do not direct the laser beam at persons, animals, vehicles or aircraft.
Maximum recommended number of lasers on one power supply = 10
Typical battery time: 15 hours for 1 laser; 3 hours for 5 lasers (fewer lasers =
increased battery life)
When possible, connect the AC adapter to the power supply to recharge the
internal battery.
