Harman JBL MS202, User Manual

Page: 25 / 30

08
Setting Alarm Clock
Make sure that the time is set correctly.
1
Under the standby mode, press the SLEEP/
TIMER until the hour indicator is flashing, and
then press the
S
/
T
button to select the hours.
2 Press the SLEEP/TIMER button until the
minute indicator is flashing, and then press the
S
/
T
button to select the minutes.
3 Press the SLEEP/TIMER button and then the
S
/
T
button to select the alarm tone: BUZZER,
FM, USB or DISC.
4 Press the SLEEP/TIMER button until the volume
indicator is flashing, and then press the
S
/
T
button to select the volume.
5 Press the SLEEP/TIMER button to complete the
alarm setting.
6 After successful setting, press the SLEEP/
TIMER button repeatedly to turn on or turn off
the alarm clock.
•
If the alarm is turned on, the icon appears.
•
If the alarm is turned off, the icon disappears.
Note:
•
The time interval between two alarm setting
steps made shall be no longer than 15 seconds,
otherwise, the product will exit the alarm setting.
•
When the alarm is on, press the button and
the alarm stops, but the alarm setting is still
there.
Setting Sleep Time
Set the sleep time during playing and the product will
be turned off automatically at the set time.
Press the SLEEP button on the remote control to
select a time frame and the product will be turned off
automatically after the set time frame.
SLEEP 90 SLEEP 60
SLEEP 30
SLEEP 15 SLEEP 00
•
Confirm to set the sleep time
Press the SLEEP button on the remote control and
the remaining sleep time appears. A few seconds
later, the original time appears again.
•
Cancel the sleep time
Press the SLEEP button repeatedly until "00" shows
to cancel the sleep time.
3 Place the disc on the tray with the printing side
forward, and press the button on the remote
control or the host to close the disc loader.
4 The host will then read and play the disc
automatically. If not, press the
button on
the remote control or the host.
Playing Audio from USB Device
1 Insert the USB to the USB Connector at the
back of the product.
2 Press the USB button on the remote control
or the
button on the host to select the USB
source.
3 The product will read and play the USB
automatically, or if not, press the
button on
the remote control or the host to play.
Play Control
Stop
•
Press the
„
button on the remote control.
Pause or resume
•
Press the button on the remote control or
the host.
Fast Forward/Backward
•
Press the or the button on the remote
control or the host for fast backward or forward,
release it to resume normal playing.
•
Press the or the button on the remote
control or the host to jump to the previous or
the next song.
Playing CD
1 Press the CD button on the remote control or
the
button on the host to select the DISC
function.
Playing
2
Press the button on the remote control or the
host to open the disc loader.