Harman JBL CINEMA SB550, Owner'S Manual

Page: 11 / 17

www.jbl.com
English
11 11
6.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are disabled. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See “ 5.1 TV connection ”).
3. To select the TV source, press repeatedly on the soundbar
or TV on the remote control.
→
When playing through an HDMI ARC cable, the status
indicator turns solid white ( ).
→ When playing through an optical cable, the status
indicator turns solid amber ( ).
6.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under “
6.2.2 TV remote
control learning ” .
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV’s user manual. You can control the /-, sound
source, and power on/standby functions on your soundbar
through the TV remote control.
6.2.2 TV remote control learning
Through IR learning, you can program the soundbar to accept IR
commands from your TV remote control, and then use your TV
remote control for simple commands.
1. Press to switch on.
2. Hold and + together for more than 10 seconds until the
status indicator flashes amber.
→
The soundbar enters the TV remote control learning
mode.
3. Point your TV remote control at the soundbar. Follow the
instructions below:
a) On the soundbar, hold one of these buttons:
+ , - , and
until the status indicator flashes red three times.
b) On your TV remote control, press the desired button twice.
→ When the status indicator on the soundbar flashes
amber, the function of the soundbar button is learnt
by your TV remote control button.
4. Repeat Step 3 to complete the button learning.
5. To exit the TV remote control learning mode, hold and +
on the soundbar until the status indicator flashes amber three
times.
6.3 Play from the Bluetooth source
Through Bluetooth, stream audio from your Bluetooth device to
the soundbar.
< 10 m / 33 ft
1. Check that the soundbar has been properly connected to
your Bluetooth device (See “ 5.2 Bluetooth connection ”).
2. To select the Bluetooth source, press repeatedly on the
soundbar or on the remote control.
3. Start audio play on your Bluetooth device.
4. Adjust the volume on the soundbar or your Bluetooth device.