8
MUTING THE SYSTEM
Momentarily press both of the soundbar’s top-panel volume
buttons at the same time, or press the remote control’s Mute
button to mute the system (The Power LED flashes.) Momentarily
press either of the soundbar’s Volume buttons or press the
remote’s Mute button again to un-mute the system.
Both Volume Buttons
Mute
Button
USING BLUETOOTH
Bluetooth is a wireless connection that will help you to stream any
music from your mobile device to your soundbar. You can pair up
to 3 Bluetooth devices at the same time.
JBL SB450
or
Bluetooth Pairing
Bluetooth Paired
LED BEHAVIOR
1. Press and hold the Bluetooth button for 3 seconds to enter
pairing mode (the button LED will quickly flash blue).
2. Open your Bluetooth settings on your mobile device, then
locate and select JBL CINEMA SB450.
3. Test the connection by streaming music from your device to
your JBL Cinema SB450.
4. To add an additional Bluetooth device (up to 3), repeat steps
1 & 2.
NOTE: If you have more than one Bluetooth device
paired at one time, one device may interrupt/override
another device simply by pressing “PLAY”.
USING JBL SOUNDSHIFT™
JBL SoundShift is a new technology that allows you to seamlessly
switch between your TV and your wireless Bluetooth device. This
helps to you watch TV and use your Bluetooth device at the same
time without reaching for the remote control to switch between the
two devices.
Soundshift is off
Soundshift is on
LED BEHAVIOR
OR
1. Confirm that you have paired at least one Bluetooth device to
the soundbar (See “Using Bluetooth” section).
2. Press the JBL Soundshift button on the Remote Control
or Top-panel buttons until the LED turns BLUE. This color
indicates that JBL SoundShift is ON.
3. Play sound from any source through your soundbar in a
normal manner.
4. Press PLAY on your mobile device to stream music. You will
hear the Bluetooth audio “break in” over your TV sound.
5. Press PAUSE on your mobile device. You will hear the audio
automatically switch back to your TV.
USING JBL CONNECT
JBL Connect lets you wirelessly daisy chain two speakers. JBL
Connect requires an additional compatible speaker like JBL Flip 3,
JBL Xtreme, or JBL Pulse 2. For more information, please visit our
website at www.jbl.com
1. Confirm that you have paired at least one Bluetooth device to
the soundbar
2. Press the JBL Connect button on the remote control or the
top-panel button (LED will blink white).
