Harman JBL BAR 800, Owner'S Manual

Page: 20 / 29

20 20
c) On a Chromecast-enabled app, play music, tap the cast
icon and select the connected soundbar.
CHROMECAST
3. To exit from the music playback, switch to other sources.
7.7 Play through AirPlay
Through AirPlay, stream audio on your iOS device to the soundbar.
1. On the soundbar,
• Check that the soundbar has been properly connected to
your home network (See “
5.3 Connection with your home
network ”).
2. On your iOS device,
a) Check that your iOS device has been connected to the
same network as the soundbar.
b) To enter the Control Center on an iOS device, swipe
down from the upper right corner. Tap to select the
connected soundbar and then, start audio streaming
from an app.
AIRPLAY
BL Bar 800_xxxx
3. To exit from the music playback, switch to other sources.
7.8 Play through Amazon Music
With the soundbar connected to Alexa, you can stream music
from the Amazon Music library to the soundbar.
1. Check that the soundbar has been properly connected to
your home network (See “ 5.3 Connection with your home
network ”).
2. On your Android or iOS device,
a) Check that your Android or iOS device has been
connected to the same network as the soundbar.
b) Launch the JBL One app, and check that you have
enabled the streaming service of Amazon Alexa.
JBL One
BL BAR 800_xxxx
3. Launch the Amazon Alexa app to start music playback.
ALEXA MRM
Play
• Open the Amazon Music app to access the Amazon
Music library.
• Make sure that you start music playback from the same
Alexa account that you have enabled in the JBL One app.
Refer to the Amazon Alexa app for more details.
NOTES:
– The soundbar can support audio streaming and cannot support
video streaming.
– During playback through Chromecast built-in, AirPlay or Alexa, music
playback pauses on the current connected device when you start
music playback on a second connected device.
– When the soundbar switches between your home Wi-Fi and wired
network during AirPlay, music playback pauses and will resume in a
few minutes, depending on the bandwidth condition of broadband.
For the connection to your home wired network, see “
5.3
Connection with your home network ”.