Harman JBL BAR 300, Owner'S Manual

Page: 13 / 26

www.jbl.com
English
13 13
6.2 3D surround sound
6.2.1 Sound calibration
Optimize your 3D surround sound experience for your unique
listening environment.
1
CALIBRATION
2
CALIBRATING
PRESS AGAIN TO CONFIRM
DONE
1. On the remote control, press CALIBR to start calibration.
→
“CALIBRATION”
is displayed on the soundbar.
2. When “PRESS AGAIN TO CONFIRM” is displayed, press
CALIBR again.
→
Countdown starts from 5 to 1.
→
Calibration tone is heard. Audio calibration starts.
“CALIBRATING” : Calibration in progress
“DONE”
: Calibration completed successfully
NOTES:
– During sound calibration, all buttons on the remote control are
disabled except for
.
6.2.2 Dolby Atmos
®
With the virtual Dolby Atmos, enjoy height sound effects when
you play movies in the TV/HDMI IN source.
ON ATMOS
OFF ATMOS
1. Connect and play your Blu-ray player or streaming device
through the HDMI ARC/HDMI eARC connector and the
HDMI connector. (See “
5.1 Connection with your TV and
digital devices ”).
2. Press on the remote control to switch on or off the height
sound effects (Default: on).
→
The screen on the soundbar shows “ON ATMOS” or
“OFF ATMOS” .
NOTES:
– Switch off the ATMOS effects, if you prefer not to have any height
sound effects during your viewing or listening.
– The ATMOS effects are available in Dolby audio content only.